Error code list for Balay washing machine

Table of contents

E03
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
E5
Cause:
Water supply error.
Solution:
Replace the solenoid valve.
See the price here
Solenoid valve
E06
Cause:
Door sensor error.
Solution:
Replace the door latch.
See the price here
E10
Cause:
Heating error.
Solution:
Replace the heating element.
See the price here
Heating element
E16
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
E17
Cause:
Water in washing machine base.
Solution:
The error code typically occurs due to a defective gasket or hose. Follow the limescale trail that leads to the defective part and replace the part.
E18
Cause:
Water drain timeout.
Solution:
Replace the drain pump.
See the price here
Drain pump
E21
Cause:
Commutator error.
Solution:
Replace the carbon brushes.

How to reset the error code after replacing the carbon brushes
1. Turn the program selector to 6 o'clock (spin)
2. Press and hold the "Option", "Menu" or spin button
3. Turn the program selector knob to 7 o'clock (pumping) and continue to hold the button for 10 seconds (or until the power button flashes)
4. Release the button and turn the program selector to 12 o'clock (stop).
See the price here
Carbon brush
E23
Cause:
Water in washing machine base.
Solution:
The error code typically occurs due to a defective gasket or hose. Follow the limescale trail that leads to the defective part and replace the part.
E26
Cause:
Water level error.
Solution:
Replace the level sensor.
See the price here
Pressure switch
E29
Cause:
Water supply error.
Solution:
Replace the aquastop inlet hose.
See the price here
E32
Cause:
Imbalance detected.
Solution:
The error code usually occurs if large pieces of clothing are washed, but the washing machine is not loaded completely - e.g. bed linen, bath towels, etc. If you wash one large bed sheet at a time, it can clump together and create an imbalance in the drum. If the error code occurs regardless of what you are washing, the error may also be due to the level control being faulty.
E33
Cause:
Too much detergent.
Solution:
The error code usually occurs if foam is formed due to too much detergent. In this case, the foam will be able to come out through the soap compartment. Use less soap when washing.
E34
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
E57
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
F01
Cause:
Water supply error.
Solution:
Replace the solenoid valve.
See the price here
Solenoid valve
F02
Cause:
Heating error.
Solution:
Replace the heating element.
See the price here
Heating element
F03
Cause:
Drain error.
Solution:
Replace the drain pump.
See the price here
Drain pump
F04
Cause:
Commutator error.
Solution:
Replace the carbon brushes.
See the price here
Carbon brush
F05
Cause:
Commutator error.
Solution:
Replace the carbon brushes.
See the price here
Carbon brush
F08
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
F16
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
F17
Cause:
Water supply error.
Solution:
Replace the solenoid valve.
See the price here
Solenoid valve
F18
Cause:
Unable to drain water.
Solution:
Replace the drain pump.
See the price here
Drain pump
F21
Cause:
Commutator error.
Solution:
Replace the carbon brushes.
See the price here
Carbon brush
F23
Cause:
Water in washing machine base.
Solution:
The error code typically occurs due to a defective gasket or hose. Follow the limescale trail that leads to the defective part and replace the part.
F26
Cause:
Water level error.
Solution:
Replace the level sensor.
See the price here
Pressure switch
F29
Cause:
Water supply error.
Solution:
Replace the solenoid valve.
See the price here
Solenoid valve
F32
Cause:
Imbalance detected.
Solution:
The error code usually occurs if large pieces of clothing are washed, but the washing machine is not loaded completely - e.g. bed linen, bath towels, etc. If you wash one large bed sheet at a time, it can clump together and create an imbalance in the drum. If the error code occurs regardless of what you are washing, the error may also be due to the level control being faulty.
F33
Cause:
Too much detergent.
Solution:
The error code usually occurs if foam is formed due to too much detergent. In this case, the foam will be able to come out through the soap compartment. Use less soap when washing.
F34
Cause:
Door is open.
Solution:
Replace the door lock.
See the price here
Door interlock
F37
Cause:
Commutator error.
Solution:
Replace the NTC sensor.
See the price here
F43
Cause:
Commutator error.
Solution:
Replace the carbon brushes.
See the price here
Carbon brush
F44
Cause:
Commutator error.
Solution:
Replace the carbon brushes.

How to reset the error code after replacing the carbon brushes
1. Turn the program selector to 6 o'clock (spin)
2. Press and hold the "Option", "Menu" or spin button
3. Turn the program selector knob to 7 o'clock (pumping) and continue to hold the button for 10 seconds (or until the power button flashes)
4. Release the button and turn the program selector to 12 o'clock (stop).
See the price here
Carbon brush
F57
Cause:
Electronics error.
Solution:
An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.
F63
Cause:
Electronics error.
Solution:
An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.
F67
Cause:
Electronics or motor error.
Solution:
The error code can both occur due to a faulty control module, but can also be caused by worn carbon brushes or a faulty engine. We recommend that you search for symptoms via our troubleshooting pages.
Key
Cause:
Child lock enabled.
Solution:
Child lock enabled. See here or in the user manual how to switch it off.

Professional machine cleaner for washing machines (500 ml)
Our professional machine wash for washing machines is a specially developed product that ensures effective cleaning of your washing machine. With regular use, this product can remove limescale, soap scum and accumulated dirt. The result is a clean and fresh machine that performs optimally and has a longer service life.

Why use Professional Machine Cleaner?
Detergent ensures that your clothes are washed clean, but it does not ensure that the washing machine is kept clean. On the contrary, the detergent accumulates over time in your washing machine and can result in a smelly machine. It is therefore important that you occasionally use machine cleaners that clean the washing machine deeply and leave it clean and fragrant.

Here's how to do it:
1. Empty the washing machine of clothes.
2. Pour 2 dl into the soap box. Run a program at 40°C without prewash.
3. Repeat the process regularly, preferably once a month, to keep the machine in top shape.
17.95EUR
In stock. Del 3-5 work days.
Read more.

Cookie information

Error code list for Balay washing machine

E03

Cause:

Solution:

E5

Cause:

Solution:

E06

Cause:

Solution:

E10

Cause:

Solution:

E16

Cause:

Solution:

E17

Cause:

Solution:

E18

Cause:

Solution:

E21

Cause:

Solution:

E23

Cause:

Solution:

E26

Cause:

Solution:

E29

Cause:

Solution:

E32

Cause:

Solution:

E33

Cause:

Solution:

E34

Cause:

Solution:

E57

Cause:

Solution:

F01

Cause:

Solution:

F02

Cause:

Solution:

F03

Cause:

Solution:

F04

Cause:

Solution:

F05

Cause:

Solution:

F08

Cause:

Solution:

F16

Cause:

Solution:

F17

Cause:

Solution:

F18

Cause:

Solution:

F21

Cause:

Solution:

F23

Cause:

Solution: