Heating element, Zanussi dishwasher - 230V/2000W

PLEASE NOTE:
If machine still washes with cold water (and can implement the program) there may be a fault with the controller. This can be corrected with a little solder and a soldering iron. And that´s without
new parts!!!

Open the door and remove the screws in the top half of the door. Behind the buttons on the door is a plastic box where the electronics are located. (Hint: Take a picture of the wires with a digital camera before pulling them out, as that way it will be easier to remember the order later).

Often you will see a dark spot on the PCB. You will need to solder here-- Use a piece of tinned wire to create the new connection.

DA6343

and other models…