Error code list for Miele washing machine

F1
Cause:
NTC-sensor error.
Solution:
Replace the NTC sensor.
F2
Cause:
NTC-sensor error.
Solution:
Replace the NTC sensor.
F3
Cause:
Water supply error.
Solution:
If the washing machine does not take in water at all, the fault code is probably due to a faulty solenoid valve. You can find a new solenoid valve here. If the washing machine takes in water, the error is probably due to the level control, which detects the water level, being faulty and needs to be replaced. Be aware that on older washing machines the level control is analogue, in which case you can just replace it. However, on newer washing machines the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the washing machine's data plate.
F10
Cause:
Water supply error.
Solution:
If the washing machine does not take in water at all, the fault code is probably due to a faulty solenoid valve. You can find a new solenoid valve here. If the washing machine takes in water, the error is probably due to the level control, which detects the water level, being faulty and needs to be replaced. Be aware that on older washing machines the level control is analogue, in which case you can just replace it. However, on newer washing machines the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the washing machine's data plate.
F11
Cause:
Cannot drain water.
Solution:
Replace the drain pump.
Drain pump
F15
Cause:
Water temperature too high or water supply error.
Solution:
The error code may be due to the washing machine being connected to the hot water tap. Connect to cold water tap instead. The error code can also be caused by no water entering the washing machine at all. Start by checking that water comes out of the tap at the connection point. If it does, the lack of water is probably due to a faulty solenoid valve or aquastop. You can find a new solenoid valve here and a new aquastop here. If the washing machine takes in water, the fault may be due to the llevel control, which measures the water level, being faulty. Be aware that on older washing machines the level control is analogue, in which case you can just replace it. However, on newer washing machines the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the washing machine's data plate.
F16
Cause:
Too much detergent.
Solution:
The error code usually occurs if foam is formed due to too much detergent. In this case, the foam will be able to come out through the soap compartment. Use less soap when washing.
F19
Cause:
Flow sensor error.
Solution:
Replace the level sensor.
Pressure switch
F20
Cause:
Heating error.
Solution:
The error code may be due to the heating element being faulty. But there can also be other reasons - we recommend that you search for symptoms via our troubleshooting guide.
Heating element
F50
Cause:
Commutator error.
Solution:
Replace the carbon brushes.
Carbon brush
F51
Cause:
Water level error.
Solution:
Replace the level sensor.
Pressure switch
F53
Cause:
Tacho generator error.
Solution:
Replace the tacho generator.
F63
Cause:
Soap- or water supply error.
Solution:
Use less soap and check the washing machine water supply.
F0220
Cause:
Water supply error.
Solution:
If the washing machine does not take in water at all, the fault code is probably due to a faulty solenoid valve. You can find a new solenoid valve here. If the washing machine takes in water, the error is probably due to the level control, which detects the water level, being faulty and needs to be replaced. Be aware that on older washing machines the level control is analogue, in which case you can just replace it. However, on newer washing machines the level control is part of the print/control and in this case you will therefore need to replace this. Contact us if you are in doubt - remember to provide as much information as possible from the washing machine's data plate.

Universal descaler - 1 kg
The professional descaler is one of our top sellers in the professional series. There is almost nothing you won't be able to descale with this descaler - use it to descale the washing machine, the iron, the coffee machine or anything else. The descaler comes in a large 1 kilo bucket, so you have enough for several uses.

If you use the descaler for a washing machine, simply fill 1 dl of descaler in the soap compartment and run a 60 degree wash.

If you use the descaling agent for an iron or coffee machine, you should dissolve the descaling agent before filling it in the water tank.
17.95EUR
In stock. Del 2-3 work days.
Read more.

Cookie information

Error code list for Miele washing machine

F1

Cause:

Solution:

F2

Cause:

Solution:

F3

Cause:

Solution:

F10

Cause:

Solution:

F11

Cause:

Solution:

F15

Cause:

Solution:

F16

Cause:

Solution:

F19

Cause:

Solution:

F20

Cause:

Solution:

F50

Cause:

Solution:

F51

Cause:

Solution:

F53

Cause:

Solution:

F63

Cause:

Solution:

F0220

Cause:

Solution: