Cookie information

We use cookies. Some for basic functions, others for statistical use and improvement of the user experience. Cookies are also used for ads personalisation. Read more in our cookie policy.

Chat weekdays 7am - 8pm
Shipments Weekdays 4.30pm
Contact us info@nettoparts.ie
Delivery time 2-5 days
Delivery € 6,95

Error code list for Siemens dishwasher

  • E01

    Cause:

    Electronics error or water in the base.

    Solution:

    Replace the level sensor.

  • E02

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • E03

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • E04

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • E05

    Cause:

    Electronics error.

    Solution:

    An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • E06

    Cause:

    Door sensor error.

    Solution:

    Replace the door lock.

  • E07

    Cause:

    Drying system error.

    Solution:

    Replace the Zeolith container.

  • E08

    Cause:

    Water level too low by heating element.

    Solution:

    Replace the aquastop.

  • E09

    Cause:

    Heat system error.

    Solution:

    Replace the heat pump.

  • E10

    Cause:

    Drying system error.

    Solution:

    Replace the Zeolith container.

  • E11

    Cause:

    Thermostat or temperature sensor error.

    Solution:

    Replace the thermostat.

  • E12

    Cause:

    Limescale formation at the heater.

    Solution:

    Descale the dishwasher and check if the salt level is set correctly.

  • E13

    Cause:

    The water temperature exceeds 75 degrees.

    Solution:

    The error usually indicates that the supply hose is connected to the hot water tap. Connect the hose to the cold water tap instead.

  • E14

    Cause:

    Error in filling system or error in water supply registered.

    Solution:

    Replace the flow sensor.

  • E15

    Cause:

    Water in dishwasher base.

    Solution:

    The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.

  • E16

    Cause:

    Error in filling system or error in water supply registered.

    Solution:

    Replace the aquastop.

  • E17

    Cause:

    Error in filling system or error in water supply registered.

    Solution:

    The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.

  • E18

    Cause:

    Error in filling system or error in water supply registered.

    Solution:

    Replace the drain pump.

  • E19

    Cause:

    Dispenser error.

    Solution:

    A dispenser error can be due to a defective dispenser, but can also be due to defects in other parts. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.

  • E20

    Cause:

    Wash motor error.

    Solution:

    Replace the wash motor.

  • E21

    Cause:

    Wash motor error.

    Solution:

    Replace the wash motor.

  • E22

    Cause:

    Clogged bottom sieve and/or filter.

    Solution:

    Replace the drain pump.

  • E23

    Cause:

    Drain pump error.

    Solution:

    Replace the drain pump.

  • E24

    Cause:

    Water level error.

    Solution:

    Replace the drain pump.

  • E25

    Cause:

    Drain pump error.

    Solution:

    Replace the drain pump.

  • E26

    Cause:

    Water supply switch error.

    Solution:

    Replace the aquastop.

  • E27

    Cause:

    Mains or supply voltage too low during washing (less than 170 V).

    Solution:

    Check the power cord and voltage.

  • E28

    Cause:

    Flow sensor error.

    Solution:

    Replace the flow sensor.

  • E29

    Cause:

    Water in dishwasher base.

    Solution:

    The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.

  • E31

    Cause:

    Drying system error.

    Solution:

    Replace the Zeolith container.

  • E92-40

    Cause:

    Cannot drain water.

    Solution:

    Clean the filter. If the error code still appears after this, it is possible that it is caused by a faulty drain pump.

  • H06

    Cause:

    Delayed start activated.

    Solution:

    The error code indicates that delay start is enabled. Press Delay start (see the user manual if you are unsure where to find this) and hold it until it shows 00 and the dishwasher should now be working again. However, be aware that H06 can also be displayed when, e.g., setting the signal volume and setting the rinse aid. If you are in doubt, you should check the dishwasher's user manual.

1
  • Professional machine cleaner for dishwashers (500 ml)
    Our professional machine cleaner for dishwashers is a specially developed product that helps remove limescale, grease and food residues from your machine. With regular use, you ensure that the dishwasher works optimally and lasts longer. The product helps achieve better washing results.

    Why use Professional Machine Cleaner?
    Dish soap and similar detergents (e.g. gel or powder) ensure that your tableware is clean - but only as long as the dishwasher is clean. The more dirt, limescale and grease that settles inside the dishwasher, the more your washing results are affected. Perhaps you have experienced that your tableware smells, even though it has just been finished in the dishwasher - or that there is still dirt and food residue on it after you have finished washing. Your dishwasher needs to be cleaned in the same way as your crockery. Professional machine cleaning is designed to penetrate deep into machine parts and effectively remove these deposits.
    17.95EUR
    In stock. Del 2-3 work days.
    Read more.
   

Shopping basket
No items in your basket.
Item total: EUR
Delivery
Edit basketProceed to checkout
0
EUR
Delivery: