Error code list for Zanussi-Electrolux dishwasher

I5E
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
I10
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop
I11
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop
I20
Cause:
Cannot drain water.
Solution:
Replace the drain pump.
Drain pump
I30
Cause:
Water in dishwasher base.
Solution:
The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.
I36
Cause:
Water in dishwasher base.
Solution:
The error code usually occurs due to a leak. To find the spare part that causes the error, you can follow the limescale trace. Replace the faulty spare part.
I40
Cause:
Water level error.
Solution:
Replace the level sensor.
Level switch
I50
Cause:
Wash motor error.
Solution:
Replace the wash motor.
Circulation pump
I60
Cause:
Heating element cannot heat the water.
Solution:
The error may be due to the water not reaching the level of the heating element (i.e. not taking in enough water). In this case, the error is usually due to a defective aquastop or solenoid valve. If the water reaches above the level of the heating element, the error is usually due to the heating element being defective.
I70
Cause:
Temperature sensor error.
Solution:
Replace the thermostat.
I80
Cause:
Electronics error.
Solution:
An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.
IC0
Cause:
Electronics error.
Solution:
An electronics error can be due to a faulty control module, but can also be due to defects in other electronics. To find out more about the problem, we recommend that you search for symptoms via our troubleshooting guide instead.
IFO
Cause:
Water supply error.
Solution:
Replace the aquastop.
Aquastop

Professional dishwasher descaler - 1 kg
If you need to descale the dishwasher, you should first check that the salt amount is set correctly. The dishwasher salt’s function is to soften the water - i.e. remove limescale from the water. And if the salt setting is correct, there should therefore be no need to descale the dishwasher. But if limescale deposits are present, then it will be necessary to descale the dishwasher.

If there is limescale in the dishwasher, you may need to descale.

Here's how to do it:
1. Empty the dishwasher
2. Fill the soap compartment
2. Run a wash at high temperature
17.95EUR
In stock. Del 2-3 work days.
Read more.

Cookie information

Error code list for Zanussi-Electrolux dishwasher

I5E

Cause:

Solution:

I10

Cause:

Solution:

I11

Cause:

Solution:

I20

Cause:

Solution:

I30

Cause:

Solution:

I36

Cause:

Solution:

I40

Cause:

Solution:

I50

Cause:

Solution:

I60

Cause:

Solution:

I70

Cause:

Solution:

I80

Cause:

Solution:

IC0

Cause:

Solution:

IFO

Cause:

Solution: